Why sometimes dividers disappear or change location by itself when adding more dividers in MeasureSquare Stone
This article will explain what to do when "too many" dividers are used and how to stabilize the areas to continue adding more.
The Reason This Happens: Each room is allocated a finite amount of memory for the creation of separate areas within a single container. When too many dividers are added, each one creates an additional sub-area within the room, consuming that room's available memory. Once the limit is exceeded, the system will erase previous dividers or corrupt their location data.
The Solution: Splitting a room by region establishes each section as its own room, thereby resetting the available memory.Solution to stabilize all the dividers:
1. Right click on divided area and click on Room Edit.
2. Select Split Room by Region.
This is technically turning these areas into rooms without walls.
There is no set number that causes this, it is per project and combination of complex geometry and room sizes, please do this periodically if you have a project that has lots of dividers. An example would be if you are going to be adding about 30+ dividers, split by region every 5 or so. This can prevent you from experiencing any errors.
Related Articles
Why sometimes dividers disappear or change location by itself when adding more dividers in MeasureSquare 8
This article will explain what to do when "too many" dividers are used and how to stabilize the areas to continue adding more. The Reason This Happens: Each room is allocated a finite amount of memory for the creation of separate areas within a ...How to Split a Room (Split Room vs Split Room by Region) in MeasureSquare Stone
This article explains how to use the Split Room and Split Room by Region features in MeasureSquare Stone. Both methods allow you to divide a single room into two separate areas, but they differ in how walls are handled after the split. Steps to Split ...How to Use Split Edge Segment in MeasureSquare Stone?
How to Use Split Edge Segment in MeasureSquare Stone Overview The Split Edge Segment feature allows you to divide a wall/edge of an area into multiple segments. This is useful for defining specific measurement points, cabinet locations, or transition ...How to Split a Room (Split Room vs Split Room by Region) in MeasureSquare 8
This article explains how to use the Split Room and Split Room by Region features in MeasureSquare 8. Both methods allow you to divide a single room into two separate areas, but they differ in how walls are handled after the split. Steps to Split a ...How do I remove a single divider on MeasureSquare Mobile for iPad?
This article will explain how to remove a single divider in MeasureSquare Mobile for iPad. This article applies to the to MeasureSquare Mobile for iPad all versions. Step 1: Zoom in to the room you want to remove the single divider. Step 2: Tap and ...