What to Do When Dividers Disappear or Change Location When Adding More in MeasureSquare 8

This article will explain what to do when "too many" dividers are used and how to stabilize the areas to continue adding more. 

This is for all versions of MeasureSquare 8. 

Please follow the instructions below when you have two many dividers and they start disappearing.

1. Right click on divided area and click on Room Edit.

2. Select Split Room by Region.

This is technically turning these areas into rooms without walls. 

There is no set number that causes this, it is per project and combination of complex geometry and room sizes, please do this periodically if you have a project that has lots of dividers. An example would be if you are going to be adding about 30+ dividers, split by region every 5 or so. This can prevent you from experiencing any errors. 

• Related Articles

• How do I remove a single divider on MeasureSquare Mobile for iPad?

  This article will explain how to remove a single divider in MeasureSquare Mobile for iPad. This article applies to the to MeasureSquare Mobile for iPad all versions. Step 1: Zoom in to the room you want to remove the single divider. Step 2: Tap and ...

• How do I move a divider line on MeasureSquare Mobile for iPad?

  This article will show you how to move a divider line on MeasureSquare Mobile for iPad. This article applies to MeasureSquare Mobile for iPad all versions. Step 1: Zoom into the room you need to adjust. Step 2: Tap and hold the divider line you need ...

• How do I change to the room name label on MeasureSquare 8?

  This article is going to show you how to change the label for the rooms in your diagram on MeasureSquare 8?. We offer different options for changing the room label. You can change each individual room or change the preset label using the steps below. ...

• How do I takeoff a circular room in MeasureSquare 8?

  This article will show you how to create a circular room in measuresquare 8. This article applies to the measuresquare 8 platform. Step1: From the takeoff tab locate the Room section where you will find Draw Rect. Click on the drop down menu (small ...

• How to customize your Room Conditions Form

  In this article, you will learn how to access the background files for your floor condition form, edit them, and upload them so that you can start using them in MeasureSquare 8 or MeasureSquare Mobile. This article applies to MeasureSquare 8 and ...