Note: Waste is based on 3 factors –
1. Size of the product
2. Install method (pattern) the product is laid in
3. Where the pattern starts
- Waste Add-on: Forced percentage of waste on NET floor area covered
- Half Reuse: Program will re-use a cut piece if 50% of a piece is remaining
- Cut and Fit: Program will re-use a cut wherever it can fit, if remainder piece is larger than system setting “Ignore Tiny Size”. (Very tight, installers must save every cut for reuse)
(Recommend 1” to account for small mosaic, but 3-4” for carpet or vinyl tiles)
- No Reuse: Any remainder piece, regardless of size, is counted as waste. (Thin or Large Format Ceramic or Specialty Products)
Example - Four identical rooms have an identical tile product laid in identical pattern position, but different waste calculation methods
Note the Waste & Usage Quantity of each.