How to set grout width on tile in MeasureSquare 8?
In this article, we are going to show you how to set grout width on tiles at the project level.
This article applies to MeasureSquare 8 versions
Step 1: Right click on the tile in the Patterns menu -> View/Modify Details. It is not the same if you right click and click view/modify details on the tile itself because this will only allow you to modify the item info, tile, etc...
Step 2: Click the drop down menu to set your grout width.
Related Articles
How Do I Adjust the Grout Width in My System Settings for MeasureSquare Mobile on iPad?
In this article, we will show you how to set your default grout width in your system settings. This article applies to MeasureSquare Mobile for iPad Build 2.9.6 and newer. Step 1: From your diagrams screen, tap on the Project Settings gear icon at ...How to Apply Tile Products as a Wall Base on MeasureSquare 8
This article will show you how to apply tile products as a wall base with grout calculation and how to apply a transition piece This article applied to MeasureSquare 8 Commercial Edition build 10115 and newer Note: This article assumes you have your ...How do I set the width and length for stone area?
This article will show you how to set the width & length for the stone area in MeasureSquare Stone. Please view the settings below to change the width and length for your product application/ layout. This article applied to MeasureSquare Stone build ...How to set random tiles by percentage with a herringbone pattern in MeasureSquare 8
In this article, we're going to show you how to set the random tiles with the the herringbone pattern. This article applies to Windows MeasureSquare 8. Step 1: Create the herringbone pattern How to create a herringbone pattern in MeasureSquare 8 ...How to Create a Tile Product on MeasureSquare Mobile for iPad
In this article we will be covering how to create a tile product on MeasureSquare Mobile for iPad. This article applies for Build 2.9.6 and newer. Step 1: Select 'Products' in the top left then select 'Product Catalog' Step 2: Select the '+' in the ...