How to correct a segmented wall into one uniform length

In this article we will show you how to eliminate redundant wall segments in order to display one uniform length

This article applies to iPad users

You may encounter split wall segments after merging a room

Step 1: Hit the information icon and click on Room edit

Step 2: Scroll down until you see the option for delete wall segment

Step 3: Use the Delete wall segment tool on the wall segment further to the left for best results. The left side can be found by placing your point of view in the middle of the room facing out towards your wall.

Here is the Result

• Related Articles

• How to use the Segment line tool outside of rooms in MeaureSquare 8?

  This article will show you how to use the segment tool on commercial software for meauresquare8. This article applies to MeasureSquare 8 Build 7232 & newer. 1. Segments can be split by the "Split Wall Segment" command. If you need to split your ...

• How to Use Split Edge Segment in MeasureSquare Stone?

  How to Use Split Edge Segment in MeasureSquare Stone Overview The Split Edge Segment feature allows you to divide a wall/edge of an area into multiple segments. This is useful for defining specific measurement points, cabinet locations, or transition ...

• How to edit wall profiles on MeasureSquare 8

  In this article, you will learn how to edit and apply products on a wall on MeasureSqaure 8. Step 1: turn on the "View wall" option at the top toolbar. Step 2: click on the room --> right-click on one of the walls that show up on the right side -- > ...

• Display Glitch with Dell & Alienware in MeasureSquare 8

  This article will show you how you to fix a Display Glitch when using a Dell with Alienware. This is a known software bug from Dell operating system. For MeasureSquare 8 Build 9814 Please open the below link and read carefully. ...

• How to Split a Room (Split Room vs Split Room by Region) in MeasureSquare 8

  This article explains how to use the Split Room and Split Room by Region features in MeasureSquare 8. Both methods allow you to divide a single room into two separate areas, but they differ in how walls are handled after the split. Steps to Split a ...