How to Connect My Moasure Device to MeasureSquare Mobile for iPad?

How to Connect My Moasure Device to MeasureSquare Mobile for iPad?

In this article, we will be covering how to connect your Moasure device to MeasureSquare Mobile for iPad as well as the two different drawing methods to bring your rooms into the program. 

This is for Builds 2.9.6 and newer.

Measuring within Moasure Pro app

Step 1: Select the 'Laser' icon at the top left of the program. 




You will need to have the 'Moasure Pro' app installed from the App Store. At this point, if you have not done so you can select 'Install' in the app store.



Step 2: Select 'Moasure' 



Step 3: Pair your Moasure device. To learn more you can find information on the Moasure website. 

Step 4: Start measuring the room using the Moasure device. 

Step 5: When on the last wall select 'Return' to be brought back to the MeasureSquare Mobile app with the dimensions transferred to the MeasureSquare app. 



Freedrawing 


Step 1: Select the 'Tools' icon in the top left. The 'Freedraw'. 



Step 2: Tap and drag your finger across the screen in a single motion to see the crosshairs appear. Lift your finger to indicate the starting point. 

Step 3: Drag your finger to start the length of the first wall, then tap on the laser button on the bottom. 

Step 4: From here you can select 'Moasure' to be redirected to the Moasure app and measure the first wall. 

Step 5: When done select 'finish measurement' which will take you back to the MeasureSquare Mobile app. 



Step 6: Continue steps 3 - 5 until the room/area is completed. 





    • Related Articles

    • How to rotate a stairway on MeasureSquare Mobile on ipad

      In this article, you will learn how to rotate a stairway on MeasureSquare Mobile on iPad Step 1: click on the stair and make sure the "i" icon pops up; Step 2: click on the "i" icon, then select "Rotate"; Step 3: Rotate the stairway to a good angle, ...

    • Why do I get an error when trying to log in on iPad?

      This article will address the issue where a message pops up with a message that says "Unknown error" when you try to log in with a MeasureSquare ID and password. This article applies to MeasureSquare Mobile Edition When you get this error message, ...

    • How do I sync my Product Catalogs in MeasureSquare Mobile for iPad?

      How do I sync my Product Catalog in MeausureSquare Mobile for iPad? In this article, we will show you how to sync your Product Catalog on MeasureSquare Mobile for iPad. This article applies to MeasureSquare Mobile App IOS. Step 1: From the diagram ...

    • How to Apply Single Products to Rooms on MeasureSquare Mobile for iPad

      This article will go over how to apply single products, such as corners or anything you would like to point out, to your jobs on MeasureSquare Mobile for iPad. This article applies to Build 2.9.6 and newer.

    • What are the system requirements for iPad?

      This article applies to Measure Square Mobile for iPad. The system requirements for the Measure Square Mobile are as follows OS iOS 11 and above Laser Compatibility Leica (e7100i for $149, D1 for $99 and D2 for $199) Bosch (GLM 50C for $150 and GLM ...