In this article we will cover how to add a border to a floor in MeasureSquare 8.
This article applies to Windows MeasureSquare 8.
Step 1: Have your area drawn out > Apply your first product that will be in the center.
Step 2: Right click on the room and select 'Create Border Dividers'.
Step 3: In the 'Create Border Dividers' menu you have the ability to select the product that your border will be made out of. You can change the width as well.
Step 4: After applying the correct products and width measurements select 'Ok'.
Create Border Dividers Options:
Add Border: Add multiple Border dividers so you can stack several borders, for example a 6" accent strip next to a 1'0" band. Each row gets its own width and product.
Delete Border: Removes the selected border row. It’s grayed out in your screenshot because no removable row is selected.
Miter Cut: Corners are joined with 45° diagonal seams, like a picture frame, instead of butt joints where one piece runs past the other. This matters for directional products like planks or patterned borders.
Lay Inward: Controls which way the border is built from its reference edge. Checked, the border width is measured inward from the edge into the room. Unchecked, the default offset direction applies, so the border may be placed differently around the room edge or around holes. If the placement looks wrong after you click OK, this is the setting to toggle.
Room Border: Creates the border along the outer perimeter of the room.
Hole Border: Also creates a border around any holes or cutouts inside the room, such as a kitchen island, column, or fireplace hearth. Uncheck it if only the outer walls should get a border.
Once you select 'Ok' you will be taken to the takeoff screen and will see the new border around your room.
Below is a video tutorial for those who prefer step by step instructions with visuals/vocal instructions.