How Do I Add a Stairway in MeasureSquare 8?

How Do I Add a Stairway in MeasureSquare 8?

In this article we will cover how to add and edit stairways in our diagram.

For all versions of Desktop MeasureSquare 8

Stairway:

  1. Open your project and click the Takeoff tab.
  2. In the Room group, click the Stairway button (below Door and Window). Click the button itself, not the small arrow beside it. 
  3. Click on the drawing canvas where you want the stairs placed.
Info
A straight stairway appears with the default settings. Its label shows the tread depth and step count on the side (for example 11" x 8) and the stair width at the bottom (for example 4'0").


Stair Landing: 

If the staircase is not a single straight run, use the dropdown to choose its configuration.

  1. Click the small arrow (▾) to the right of the Stairway button.
  2. Pick the configuration that matches the job site:
    • Quarter-turn Landing: a 90° turn with a square landing
    • Quarter-turn Radius Landing: a 90° turn with a rounded landing
    • Half-turn Landing: a 180° (U-shaped) turn with a landing
    • Half-turn Radius Landing: a 180° turn with a rounded landing
    • Quarter-turn with Winder Treads: a 90° turn using pie-shaped winder steps instead of a landing
    • Quarter-turn with Curved Treads: a 90° turn using curved treads
  3. The stairway on the canvas updates to the new layout. For example, a landing section is added at the top of the straight run by clicking & holding the landing, dragging and snapping it onto the stairway.


Adjust the stairway's properties

  1. Click the stairway on the canvas to select it. Its outline turns red.
  2. The Property View panel opens on the right side of the screen. If it does not, click on << icon on the right side of the screen to open the Property View panel. 
  3. Under Stair Unit, enter the measurements you took on site (steps, widths, rise and so on).
  4. Under Stairway, set the covering style, stringers, and any products or notes.
  5. Press Enter or click away from a field to apply each change. The drawing updates to match.